Posts

10 ft Crossmemberless Dump Body

10 ft Crossmemberless Dump Body – Unit of the Month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/8
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
14 ft frame type dump body

14 ft Frame Type Dump Body – Feature Unit of the Week

Dump Body of the Week

14 ft Frame Type Dump Body

This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.

14 ft frame type dump body

This unit features the following spec:

F-14 DUMP BODY – FRAME TYPE – 14′

Yardage: 12/14

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 42″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTW-63110

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: No

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

 

DB OPTIONS # 2

2 Driver Side &

Passenger Side Step

1/4 x 2 Tarp Tie Rail

 

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: None

Wires in Conduit Yes

 

PAINT

Color: Warren Black

 

PTO   POWER TAKE OFF

PTO Muncie TG6 Series

 

TARP SYSTEM – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x17′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Tow Hooks: No

Electric Plug: 7 Way

Pup Rigging: No

Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.

Visit our sister websites for information on other great Warren products:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

Heavy Duty Demolition Dump Body

Warren Dump Body of the Week – 16.5′ WAR Body

heavy duty demolition dump body

IMG_5672 2

Heavy Duty Demolition Dump Body

This week’s featured dump body is a heavy duty demolition dump body manufactured for our great customer, Worldwide Equipment – Columbia. This unit has a special paint job with matching fenders, per the customers request.

Dump Body:

Yardage: 19/21
Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450

Side / Material: 54” 1/4 AR450

Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
IMG_5674 2

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 60
Slope: None
Chains: 5/16″
Double Acting: No
High Lift Gate: No
Water Tight: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24”)
Asphalt Apron: 8″ Push Type
Center Board Pockets: Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal w/air shift CCW

Console: Clutch Shift Air
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Side Boards: Pine – 2×8
Covers: No
Wires in Conduit No

Paint:

Color: Metallic Blue
PTO POWER TAKE OFF – PTO Muncie TG8 Series
TARP SYSTEM TARP system – installed
Brand: Donovan
Manual / Electric: Manual

Fender Match – Metallic Blue
Aluminum Tread plate installation

The WAR body is Warren’s heavy duty demolition dump body model. For more information on the options of this elliptical dump body, please visit our sister website www.dumptrucks.com. There you will find information on all of our great dump body models. Remember, we can customize any of our models to fit your specific needs.

Ready to get a quote on your next unit? Call us today at 803-776-7400!

elliptical demolition dump body

Featured Dump Body of the Week

Elliptical Demolition Dump Body

elliptical demolition dump body

This week’s featured Dump Body of the Week is an Elliptical Demolition Dump Body manufactured in Collins, MS, and installed in Birmingham, AL. This unit is one of two units being done for Long Lewis Western Star.

This Elliptical Demolition Dump Body has the following specifications:

Yardage: 21/21
Floor Material: 1/4 AR450
Front / Material: 62″ 1/4 AR450
Side / Material: 62″ 1/4 AR450
Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes

TAILGATE
Air Operated: Yes
Panel: 3 Horizontal
Material: 1/4 AR450
Height: 62
Slope: None
Chains: 5/16″
Double Acting: No
High Lift Gate: Air Operated

DB OPTIONS # 1
Cabshield: Full Width, 1/2 (24″)
Asphalt Apron: 8″ Push Type
Bolt On: No
Center Board Pockets No
Lights: LED Standard

DB OPTIONS # 2 Steps DS; Alum Gravel Guards
INSTALL
Hydraulic Hoses/Fittings: Yes
Pump: 35 gal CW (400-80260)
Console: Air/Air
Conspicuity Tape: No
Mudflaps and Brackets: Yes
Side Boards: None
Covers: Yes
Wires in Conduit No

PAINT Warren Black

PTO POWER TAKE OFF
PTO Muncie CS Series (Auto)
TARP SYSTEM TARP system – installed
Brand: Donovan
TOW PACKAGE
Pintle Plate: 3/4″
Pintle Hitch: 25 Ton Swivel
Glad Hands: Yes
D Rings: Yes
Tow Hooks: Yes
Electric Plug: 7 Way

Ready to purchase your next dump body? CALL US TODAY at 800-804-5765! We have dedicated sales representatives standing by to answer your questions and send you a quote.

For more information about our demolition dump bodies, please visit our Products page. Be sure to visit our sister company websites: