Posts

10 ft Crossmemberless Dump Body

10 ft Crossmemberless Dump Body – Unit of the Month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/8
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
14 ft frame type dump body

14 ft Frame Type Dump Body – Feature Unit of the Week

Dump Body of the Week

14 ft Frame Type Dump Body

This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.

14 ft frame type dump body

This unit features the following spec:

F-14 DUMP BODY – FRAME TYPE – 14′

Yardage: 12/14

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 42″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTW-63110

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: No

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

 

DB OPTIONS # 2

2 Driver Side &

Passenger Side Step

1/4 x 2 Tarp Tie Rail

 

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: None

Wires in Conduit Yes

 

PAINT

Color: Warren Black

 

PTO   POWER TAKE OFF

PTO Muncie TG6 Series

 

TARP SYSTEM – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x17′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Tow Hooks: No

Electric Plug: 7 Way

Pup Rigging: No

Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.

Visit our sister websites for information on other great Warren products:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

16 ft Dump Body – Featured Unit of the Week

Dump Body of the Week

16 ft Dump Body

This week’s dump body of the week is a 16 ft dump body, currently located at Truckworx in Montgomery. This unit is perfect for everyday hauling and is currently FOR SALE! For information, visit http://www.truckworx.com/inventory/specsheet/?ID=11174955

viper red

Our frameless dump body is the original workhorse of the Warren dump body line. This steel constructed body has the following spec:

FL-16 – FRAMELESS 16’

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

Clear Backup: No

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Hardwood – 2×8

Covers: No

Wires in Conduit No

Delivery Fuel/Charges: No

 

PAINT

Color: Warren Black

PTO    POWER TAKE OFF

PTO Muncie CS Series for Allison

 

TARP SYSTEM

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hook: 30 Ton Rigid

Gladhands: Yes

D Rings: Yes

Plug: 7 Way

Call our dedicated sales representative to spec your next dump body at 800-804-5765.

16 ft dump body

Our dump bodies have continuous welding throughout for added strength and durability. This unit features a side swing tailgate, but we also offer standard tailgates, as well as air high lift gates.

 

All of our models can be customized to meet your specific needs. To learn more about our full line of dump bodies, please visit our sister website at www.dumptrucks.com/products/dump-bodies!

FL Series Dump Body: Square Type Dump Body

Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

 

PAINT

Color: Warren Black

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

square type dump body

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-804-5765!

Heavy Duty Demolition Dump Body

Warren Dump Body of the Week – 16.5′ WAR Body

heavy duty demolition dump body

IMG_5672 2

Heavy Duty Demolition Dump Body

This week’s featured dump body is a heavy duty demolition dump body manufactured for our great customer, Worldwide Equipment – Columbia. This unit has a special paint job with matching fenders, per the customers request.

Dump Body:

Yardage: 19/21
Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450

Side / Material: 54” 1/4 AR450

Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
IMG_5674 2

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 60
Slope: None
Chains: 5/16″
Double Acting: No
High Lift Gate: No
Water Tight: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24”)
Asphalt Apron: 8″ Push Type
Center Board Pockets: Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal w/air shift CCW

Console: Clutch Shift Air
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Side Boards: Pine – 2×8
Covers: No
Wires in Conduit No

Paint:

Color: Metallic Blue
PTO POWER TAKE OFF – PTO Muncie TG8 Series
TARP SYSTEM TARP system – installed
Brand: Donovan
Manual / Electric: Manual

Fender Match – Metallic Blue
Aluminum Tread plate installation

The WAR body is Warren’s heavy duty demolition dump body model. For more information on the options of this elliptical dump body, please visit our sister website www.dumptrucks.com. There you will find information on all of our great dump body models. Remember, we can customize any of our models to fit your specific needs.

Ready to get a quote on your next unit? Call us today at 803-776-7400!

Frameless 16 ft Dump Body – Featured Unit of the Week

Featured Dump Body of the Week

Frameless 16 ft Dump Body

frameless 16 ft dump body

This week’s dump body of the week is a frameless 16 ft dump body manufactured in Collins, MS, and installed in Birmingham. This was manufactured for one of our great customers in Cumming, GA. This frameless 16 ft dump body has the below specifications. Be sure to visit our FL/F Product Page for additional images and information on our Frameless dump body model.

Body

Yardage: 16/18
Floor Material: 3/16 A1011
Front / Material: 52″ 10 GA A1011
Side / Material: 46″ 10 GA A1011
Vertical Side Brace: Yes
Horizontal Brace: Yes
Hoist / Cylinder: VTLW-74135

Tailgate

Air Operated: Yes
Panel: 6
Material: 10 GA A1011
Height: 52
Slope: None
Chains: 5/16″

The hard working team at Truck and Trailer installed a Muncie TG6 Series PTO and Permco pump on the Mack truck in preparation for the dump body install. As a top of the line dump body manufacturer, we can manufacture a body to meet your specific needs. Call us today at 800-804-5765 to speak to one of our dedicated sales representatives.

Be sure to visit our sister websites for information on our full line of products:

Frame type 15 ft

Dump Body of the Week – Frame Type 15 ft

Dump Body of the Week

Frame Type 15 ft

This week’s dump body of the week is a Frame type 15 ft body built in Collins, MS. This steel dump body was recently purchased by Empire Truck Sales, Inc. in Jackson, MS. It was mounted on one of their Western Star Trucks for the Mississippi Department of Wildlife Fisheries and Parks. The Warren F series dump body is perfect for municipalities as they are customizable to fit specific municipal needs and built for durability and long product life.

This frame type 15 ft body features 1/4 AR450 steel for floor, side, front, and tailgate material and also has many special options including a tow package, bed liner, and toolbox. This high-tensile steel constructed dump body has the following specifications:

Floor Material: 1/4 AR450

Front/Material: 50” 1/4 AR450

Side/ Material: 42” 1/4 AR450

Vertical and Horizontal Side Braces

Hoist/ Cylinder: VTW-63126

Tailgate: 9 Panel

Material: 1/4 AR 450

Height: 50”

Chains: 5/16”

Cabshield: Full Width – 3/4 (36”)

Asphalt Apron: 10” push type

Drive Side & Passenger Side step
Driver Side & Passenger Side shovel brackets
Cabshield mt 6″ amber beacon LED w/guard
36x18x18 tool box w/t handle
1/4″ tube top rail
1/2″ bed liner
AR450m side wings
5″ I-beam longsills
1/4″ AR sidewings on push apronTow Package: 1″ Pintle Plate
Pintle Hitch: 50T
Electric Plug: 7 Way

We are proud to work with the state of Mississippi and look forward to our continued partnership with Empire Truck Sales, Inc.! We have built equipment for several different departments and always enjoy working with the state.

Visit our product pages for more information about our various dump body models. If you are looking for your next dump body, be sure to call us today at 800.804.5765. We have a dedicated sales team standing by to answer all of your questions.