10 ft Crossmemberless Dump Body

10 ft Crossmemberless Dump Body – Unit of the Month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/8
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • – See information on other dump body models
  • – Find information on our ag and ice control spreaders
  • – Find information on our bulk feed equipment including trailers and bodies
  • – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

Body of the Week – 15 ft Frameless Dump Body

15 ft Frameless Dump Body

15 ft frameless dump body

This week’s dump body of the week is a 15 ft frameless dump body. This is a Warren FL-15 that was manufacturing in Collins, MS, and sent to our Talco, TX, location for installation and mounting. This unit was completed for the City of San Antonio and has the below specifications:

15 ft Frameless Dump Body

15 ‘ Platform Dump Body
Yardage: 16/16
Floor Material: 3/16 A1011
Front / Material: 48” 10 GA A1011
Side /  Material: 48” 10 GA A1011IMG_5011
Vertical Side Brace: Yes
Horizontal Side Brace: No
Hoist / Cylinder: VTLW-63126
Color: Warren Black
PTO Muncie CS Series (Auto)
Donovan “Bullet” Electric Tarp System
HD, Bent, Aluminum Side Arms, Cab Operated
Tarp Size: 84″x17′
Tarp Type: Mesh
Pump: 22 gal w/air shift CW
Console: Clutch Shift Air
Mudflaps and Brackets: Yes


Panel: 2 Vertical
Material: 10 GA A1011
Height: 48
Slope: None
Chains: 5/16″
Center Opening: YesIMG_5012

Cabshield and Options:

Cabshield: Full Width-1/2 (24″)
Body Lights: LED Yes
(2) Metal Clad Amber Reflector
(4) Metal Clad Red Reflectorss
(4) ID lights in Rubrail (2) Amber
(2) Red
(2) S/T/T In Rear Crossmember
(2) Reverse in Rear Crossmember
(3) ID Lights in Rear Crossmember
Mudflaps in Front 7 Rear of Tires
Whelen Amber “HIDE-A-WAY” LED
Strobes, (1) in Each Headlight,
(1) in each Reverse Light


Warren works with many municipalities and values our relationship with them all. If you have any questions about the spec for your municipal bid, do not hesitate to contact us.

Contact one of our dedicated sales representatives for information on all of our great dump body models. Visit our sister website, for more information on all of our great dump body models. Call us today at 800-804-5765 to get a quote for your next unit!

WAR series dump body

WAR Series Dump Body of the Week

Dump Body of the Week

Blue WAR Series Dump Body

This week’s dump body of the week is a blue WAR series dump body that is 16.5ft long. This body was manufactured in Collins, MS, and installed at our Columbia, SC, location. This durable body was sold to a local truck dealer, Worldwide Equipment, and is mounted on a white Kenworth truck. This beautiful truck was picked up last week by Bill Faircloth from Worldwide Equipment – Columbia, one of our best customers!

Our standard features for the WAR Series are:

  • Continuously welded unibody design
  • 8″ I-Beam @ 13.0#/ft. long rails
  • No Crossmembers
  • 1/4″ AR-450
  • 46″ Height
  • 1/4″ AR-450
  • 4″ x 4″ 1/4″ structural tubing top rails
  • 10″ full depth rear corner post and rear skirt
  • 60″ height
  • 1/4″ AR-450
  • 3 Panel Horizontal Braced
  • Ground op side swing tailgate <– Click to watch our YouTube video
  • Flush mounted steel tailgate hardware with 1-1/4″ hinges and pins
Front Bulkhead:
  • 60″ height
  • 1/4″ AR-450
Dimensions: Length – 16.5′
As a company, we believe in relationships. When you buy a dump body manufactured by Warren, you are not only getting a high quality dump body, but also excellent customer service. Whether you are looking for a heavy duty body like the WAR series, or a more standard body like our F/FL Series, we have the right body for your needs. Our dedicated sales team that is willing and ready to help you spec your next dump body.

Call us today at 800.804.5765

dump truck

16.5 Dump Truck of the Week

WAR Dump Truck of the Week

dump truck

WAR series dump body and kenworth truck

WAR dump body

WAR dump body

This week’s dump truck of the week is a WAR (Demolition) Series dump body. The WAR Dump body was purchased by Worldwide Equipment, Inc. and put on one of their Kenworth trucks. The dump body was manufactured in Collins, MS, and sent to Columbia, SC, for installation. The Columbia installation team has been working tirelessly to complete this install for Worldwide Equipment. This fantastic dump truck was picked up yesterday by George Barger and his dedicated team.

This WAR dump body features:

  • AR ELLIPTICAL – 16.5′
  • Yardage: 17/20
  • Floor Material: 1/4 AR400
  • Front / Material: 56″ 1/4 AR400
  • Side / Material: 48″ 1/4 AR400
  • Tailgate: Air Operated: Yes
  • Tailgate Panel: 2 Horizontal
  • Tailgate: Side Swing – Ground Operated; for more information, watch this video: YouTube Video
  • PTO: Muncie TG8 Series
For more information on our WAR Dump Body model or any of our dump body models, please contact us at 800-804-5765.