Crossmemberless WXL-16.5 Dump Body

Dump Body of the Week

Crossmemberless Dump Body

This week’s featured unit is a WXL-16.5, a crossmemberless dump body for Shealy Truck Center in Columbia, SC. This unit is light weight, but strong! This dump body is constructed out of AR450 steel, which gives it strength, but saves weight by having no crossmembers. This model is perfect for all of your heavy duty hauling, but also works great for your asphalt application.

crossmemberless dump body

This great unit has the following specifications:

CROSSMEMBERLESS DUMP BODY – 16′-6″

Yardage: 17/20
Floor Material: 3/16 AR450
Front / Material: 56″ 3/16 AR450
Side / Material: 48″ 3/16 AR450
Vertical Side Brace: Yes
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 56
Slope: 6″
Chains: 3/8″
High Lift Gate: YES

Cabshield: Variable Width-1/2 (24″)
Asphalt Apron: 8″ Push Type
Bolt On: No
Center Board Pockets Yes
Lights: LED Standard

OTHER OPTIONS:
INSTALL DUMP BODY VIBRATOR

Hydraulic Hoses/Fittings: Yes
Pump: 22 gal w/air shift CW
(400-80262)
Side Boards: Pine – 2×8
Color: METALLIC BLUE
POWER TAKE OFF
PTO Muncie TG6 Series (AUTO)
Brand: Donovan
Manual / Electric: Electric
Aluminum / Steel: Aluminum
Bent Arm: Yes
Tarp Size: 90″x18′
Tarp Type: Mesh

Lift Axle:
Type: Steerable
Rating: 13,200 lbs.
Controls: In Cab Elec./Air Control

 

For information on our other great dump body models, please visit our Products page at dumptrucks.com. For information on our different locations, please visit our sister websites at:

To get a quote on your next dump body, contact us at 800-804-5765! We have dedicated sales representatives standing by to answer all of your questions and provide you with a quote for your specs!

Frameless 16 ft Dump Body – Featured Unit of the Week

Featured Dump Body of the Week

Frameless 16 ft Dump Body

frameless 16 ft dump body

This week’s dump body of the week is a frameless 16 ft dump body manufactured in Collins, MS, and installed in Birmingham. This was manufactured for one of our great customers in Cumming, GA. This frameless 16 ft dump body has the below specifications. Be sure to visit our FL/F Product Page for additional images and information on our Frameless dump body model.

Body

Yardage: 16/18
Floor Material: 3/16 A1011
Front / Material: 52″ 10 GA A1011
Side / Material: 46″ 10 GA A1011
Vertical Side Brace: Yes
Horizontal Brace: Yes
Hoist / Cylinder: VTLW-74135

Tailgate

Air Operated: Yes
Panel: 6
Material: 10 GA A1011
Height: 52
Slope: None
Chains: 5/16″

The hard working team at Truck and Trailer installed a Muncie TG6 Series PTO and Permco pump on the Mack truck in preparation for the dump body install. As a top of the line dump body manufacturer, we can manufacture a body to meet your specific needs. Call us today at 800-804-5765 to speak to one of our dedicated sales representatives.

Be sure to visit our sister websites for information on our full line of products:

Body of the Week – 15 ft Frameless Dump Body

15 ft Frameless Dump Body

15 ft frameless dump body

This week’s dump body of the week is a 15 ft frameless dump body. This is a Warren FL-15 that was manufacturing in Collins, MS, and sent to our Talco, TX, location for installation and mounting. This unit was completed for the City of San Antonio and has the below specifications:

15 ft Frameless Dump Body

15 ‘ Platform Dump Body
Yardage: 16/16
Floor Material: 3/16 A1011
Front / Material: 48” 10 GA A1011
Side /  Material: 48” 10 GA A1011IMG_5011
Vertical Side Brace: Yes
Horizontal Side Brace: No
Hoist / Cylinder: VTLW-63126
Color: Warren Black
PTO Muncie CS Series (Auto)
Donovan “Bullet” Electric Tarp System
HD, Bent, Aluminum Side Arms, Cab Operated
Tarp Size: 84″x17′
Tarp Type: Mesh
Pump: 22 gal w/air shift CW
Console: Clutch Shift Air
Mudflaps and Brackets: Yes

Tailgate:

Panel: 2 Vertical
Material: 10 GA A1011
Height: 48
Slope: None
Chains: 5/16″
Center Opening: YesIMG_5012

Cabshield and Options:

Cabshield: Full Width-1/2 (24″)
Body Lights: LED Yes
(2) Metal Clad Amber Reflector
(4) Metal Clad Red Reflectorss
(4) ID lights in Rubrail (2) Amber
(2) Red
(2) S/T/T In Rear Crossmember
(2) Reverse in Rear Crossmember
(3) ID Lights in Rear Crossmember
Mudflaps in Front 7 Rear of Tires
Whelen Amber “HIDE-A-WAY” LED
Strobes, (1) in Each Headlight,
(1) in each Reverse Light

 

Warren works with many municipalities and values our relationship with them all. If you have any questions about the spec for your municipal bid, do not hesitate to contact us.

Contact one of our dedicated sales representatives for information on all of our great dump body models. Visit our sister website, dumptrucks.com for more information on all of our great dump body models. Call us today at 800-804-5765 to get a quote for your next unit!

demolition dump body

Demolition Dump Body – Feature of the Week

Dump Body of the Week

Demolition Dump Body

This week’s dump body of the week is a demolition dump body for Worldwide Equipment in Columbia, SC. This body was manufactured in Collins, MS, at our Warren, Inc. location and painted and installed in Columbia, SC. This body has a special paint job, including matching red fenders, which makes for a great looking truck and body combination!

demolition dump body

This body is a 16.5 ft WAR body mounted on a Kenworth T880 truck and has the below specifications.

Demolition Dump Body:

Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450
Side / Material: 48″ 1/4 AR450
Vertical Side Brace: No
Horizontal Brace: NoIMG_4910
Hoist / Cylinder: VTLW-74135

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 56
Chains: 5/16″
Double Acting: Yes
Standard
Water Tight: None

IMG_4911Installation:

Cabshield: Full Width-1/2 (24″)
Asphalt Apron: 8″ Push Type
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal PERMCO
Chrome Turnouts: Yes (1)
Side Boards: Pine – 2×8 painted
Covers: Aluminum

Color: RED
PTO Muncie TG8 Series

If you are looking for a new dump body, please call us at 800-804-5765. Also, be sure to visit our sister website www.dumptrucks.com for more information about all of our great dump body models. Whether you are looking for a light duty dump body or a very heavy duty dump body, we have the right model for you! We pride ourselves on being able to customize our bodies to your specific specifications.

Do not forget that Warren makes several different products, not only dump bodies. We also manufacture dump trailers (both steel and aluminum), feed trailers and bodies, litter spreaders, lime and fertilizer spreaders, as well as aluminum dump bodies. For more information about each of our great product lines, please visit each website. If you have any questions, please call 803-776-7400!

Aluminum Dump Body – Dump Body of the Week

Featured Dump Body

Dump Body of the Week – Aluminum Dump Body

This week’s featured dump body is an aluminum dump body for Worldwide Equipment in Columbia, SC. This is one of ten units purchased by Worldwide for one of their valued customers in Sumter, SC.  Their customer is a local South Carolina hauling company that was looking to expand their fleet. We are very excited to be part of their expansion! The units were manufactured in Plant City, FL, and feature several special options. Each unit is 18.6′ long and has a water tight sealed tailgate.

aluminum dump body

Body Specs:

  • Floor Material: 1/4 ALUM 5083
  • Front / Material: 56″ .190 ALUMwater tight tailgate
    5454
  • Side / Material: 48″ .160 ALUM
    5454
  • Vertical Side Brace: Yes
  • Tailgate: 9 Panel

    Material: .190 ALUM 5454
    Height: 56
    Slope: 6″
    Chains: 5/16″
    Water Tight: Yes with 4 aluminum winders (1) each side (2) under
    gatealuminum tailgate

  • Cabshield: Full Width-1/2 (24″)
    Asphalt Apron: 8″
    Center Board Pockets Yes
    Lights: LED Standard
    Oval S/T/T: (1) Per Post
  • POWER TAKE OFF
    Muncie TG8 Series

The winders featured on this aluminum dump body tailgate help to further secure the water tight seal. Winders can be put on steel and aluminum bodies with or without a water tight gate. We see many people on the coast who haul sludge add winders to their standard tailgates to further secure the tailgate with their high moisture content load.

To get a quote for your next aluminum dump body or steel dump body, please contact us at 803-776-7400. When you buy a Warren product you not only buy a quality product, but also a great customer experience. Our conveniently located office houses an improved Parts Department. Be sure to ask for Erik to receive help on any and all of your parts needs!

For information on all of our dump body models, please visit www.dumptrucks.com

 

For more information about our aluminum dump bodies, please visit www.warrentrailers.com.

Frame type 15 ft

Dump Body of the Week – Frame Type 15 ft

Dump Body of the Week

Frame Type 15 ft

This week’s dump body of the week is a Frame type 15 ft body built in Collins, MS. This steel dump body was recently purchased by Empire Truck Sales, Inc. in Jackson, MS. It was mounted on one of their Western Star Trucks for the Mississippi Department of Wildlife Fisheries and Parks. The Warren F series dump body is perfect for municipalities as they are customizable to fit specific municipal needs and built for durability and long product life.

This frame type 15 ft body features 1/4 AR450 steel for floor, side, front, and tailgate material and also has many special options including a tow package, bed liner, and toolbox. This high-tensile steel constructed dump body has the following specifications:

Floor Material: 1/4 AR450

Front/Material: 50” 1/4 AR450

Side/ Material: 42” 1/4 AR450

Vertical and Horizontal Side Braces

Hoist/ Cylinder: VTW-63126

Tailgate: 9 Panel

Material: 1/4 AR 450

Height: 50”

Chains: 5/16”

Cabshield: Full Width – 3/4 (36”)

Asphalt Apron: 10” push type

Drive Side & Passenger Side step
Driver Side & Passenger Side shovel brackets
Cabshield mt 6″ amber beacon LED w/guard
36x18x18 tool box w/t handle
1/4″ tube top rail
1/2″ bed liner
AR450m side wings
5″ I-beam longsills
1/4″ AR sidewings on push apronTow Package: 1″ Pintle Plate
Pintle Hitch: 50T
Electric Plug: 7 Way

We are proud to work with the state of Mississippi and look forward to our continued partnership with Empire Truck Sales, Inc.! We have built equipment for several different departments and always enjoy working with the state.

Visit our product pages for more information about our various dump body models. If you are looking for your next dump body, be sure to call us today at 800.804.5765. We have a dedicated sales team standing by to answer all of your questions.

WAR series dump body

WAR Series Dump Body of the Week

Dump Body of the Week

Blue WAR Series Dump Body

This week’s dump body of the week is a blue WAR series dump body that is 16.5ft long. This body was manufactured in Collins, MS, and installed at our Columbia, SC, location. This durable body was sold to a local truck dealer, Worldwide Equipment, and is mounted on a white Kenworth truck. This beautiful truck was picked up last week by Bill Faircloth from Worldwide Equipment – Columbia, one of our best customers!

Our standard features for the WAR Series are:

Construction:
  • Continuously welded unibody design
Understructure:
  • 8″ I-Beam @ 13.0#/ft. long rails
  • No Crossmembers
Floor:
  • 1/4″ AR-450
Sides:
  • 46″ Height
  • 1/4″ AR-450
  • 4″ x 4″ 1/4″ structural tubing top rails
  • 10″ full depth rear corner post and rear skirt
Tailgate:
  • 60″ height
  • 1/4″ AR-450
  • 3 Panel Horizontal Braced
  • Ground op side swing tailgate <– Click to watch our YouTube video
  • Flush mounted steel tailgate hardware with 1-1/4″ hinges and pins
Front Bulkhead:
  • 60″ height
  • 1/4″ AR-450
Dimensions: Length – 16.5′
As a company, we believe in relationships. When you buy a dump body manufactured by Warren, you are not only getting a high quality dump body, but also excellent customer service. Whether you are looking for a heavy duty body like the WAR series, or a more standard body like our F/FL Series, we have the right body for your needs. Our dedicated sales team that is willing and ready to help you spec your next dump body.

Call us today at 800.804.5765

dump truck

16.5 Dump Truck of the Week

WAR Dump Truck of the Week

dump truck

WAR series dump body and kenworth truck

WAR dump body

WAR dump body

This week’s dump truck of the week is a WAR (Demolition) Series dump body. The WAR Dump body was purchased by Worldwide Equipment, Inc. and put on one of their Kenworth trucks. The dump body was manufactured in Collins, MS, and sent to Columbia, SC, for installation. The Columbia installation team has been working tirelessly to complete this install for Worldwide Equipment. This fantastic dump truck was picked up yesterday by George Barger and his dedicated team.

This WAR dump body features:

  • AR ELLIPTICAL – 16.5′
  • Yardage: 17/20
  • Floor Material: 1/4 AR400
  • Front / Material: 56″ 1/4 AR400
  • Side / Material: 48″ 1/4 AR400
  • Tailgate: Air Operated: Yes
  • Tailgate Panel: 2 Horizontal
  • Tailgate: Side Swing – Ground Operated; for more information, watch this video: YouTube Video
  • PTO: Muncie TG8 Series
For more information on our WAR Dump Body model or any of our dump body models, please contact us at 800-804-5765.
stainless steel dump body

Body of the Week – Stainless Steel Dump Body

Stainless Steel Dump Body of the Week

ss dump bodystainless steel dump body

ss dump body

 

This week’s body of the week is a stainless steel dump body manufactured for the City of Philadelphia. This truck also features our Warren AC-620A tailgate spreader on the rear unit. Our dedicated Sales Manager, Betty Sampley, has been selling to the City of Philadelphia for 20 years. These sales take place thru Intercon Truck of Philadelphia, one of Warren’s valued distributors.  The ss dump body boasts the following features:

7 Gauge 304 Stainless steel body with ¼” AR 400 1 pc floor.
Integral 304 3/16” cab shield
8” 3/16” 304 ss asphalt apron
2” Bustin Serrated 304 stainless steel grip strut walk rails each side

The stainless AC-620A tailgate spreader specs: 3/16” 304 stainless steel with ¼” 304 stainless steel endplate tailgate spreader with 18” polyurethane spinner disc.

Warren is dedicated to producing dependable, high-quality products. We would love the opportunity to manufacture your next ss dump body or spreader!

Contact us at 1-800-228-4842 or info@dumptrucks.com.