10 ft Crossmemberless Dump Body

10 ft Crossmemberless Dump Body – Unit of the Month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/8
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
14 ft frame type dump body

14 ft Frame Type Dump Body – Feature Unit of the Week

Dump Body of the Week

14 ft Frame Type Dump Body

This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.

14 ft frame type dump body

This unit features the following spec:

F-14 DUMP BODY – FRAME TYPE – 14′

Yardage: 12/14

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 42″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTW-63110

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: No

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

 

DB OPTIONS # 2

2 Driver Side &

Passenger Side Step

1/4 x 2 Tarp Tie Rail

 

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: None

Wires in Conduit Yes

 

PAINT

Color: Warren Black

 

PTO   POWER TAKE OFF

PTO Muncie TG6 Series

 

TARP SYSTEM – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x17′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Tow Hooks: No

Electric Plug: 7 Way

Pup Rigging: No

Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.

Visit our sister websites for information on other great Warren products:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

16 ft Dump Body – Featured Unit of the Week

Dump Body of the Week

16 ft Dump Body

This week’s dump body of the week is a 16 ft dump body, currently located at Truckworx in Montgomery. This unit is perfect for everyday hauling and is currently FOR SALE! For information, visit http://www.truckworx.com/inventory/specsheet/?ID=11174955

viper red

Our frameless dump body is the original workhorse of the Warren dump body line. This steel constructed body has the following spec:

FL-16 – FRAMELESS 16’

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

Clear Backup: No

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Hardwood – 2×8

Covers: No

Wires in Conduit No

Delivery Fuel/Charges: No

 

PAINT

Color: Warren Black

PTO    POWER TAKE OFF

PTO Muncie CS Series for Allison

 

TARP SYSTEM

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hook: 30 Ton Rigid

Gladhands: Yes

D Rings: Yes

Plug: 7 Way

Call our dedicated sales representative to spec your next dump body at 800-804-5765.

16 ft dump body

Our dump bodies have continuous welding throughout for added strength and durability. This unit features a side swing tailgate, but we also offer standard tailgates, as well as air high lift gates.

 

All of our models can be customized to meet your specific needs. To learn more about our full line of dump bodies, please visit our sister website at www.dumptrucks.com/products/dump-bodies!

FL Series Dump Body: Square Type Dump Body

Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

 

PAINT

Color: Warren Black

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

square type dump body

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-804-5765!

AR-450 Dump Body

AR-450 Dump Body – Featured Unit of the Week

AR-450 Dump Body

Demolition Dump Body – Featured Unit of the Week

This week’s dump body of the week is an AR-450 dump body for Burrough’s Diesel. This all 1/4” AR-450 dump body is an elliptical dump body that was recently displayed in theMississippi Association of Supervisors Convention. This unit was one of two dump bodies purchased by Burrough’s for Noxubee County. This WAR-16 body was installed on a 4700 Western Star.

IMG_5037

WAR-16          DUMP BODY – AR ELLIPTICAL – 16′

Yardage: 19/21

Floor Material: 1/4 AR450

Front / Material: 62″ 1/4 AR450

Side / Material: 54″ 1/4 AR450

Vertical Side Brace: No

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 2 Horizontal

Material: 1/4 AR450

Height: 62″

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: Air Operated

Side Swing – Ground Operated: No

Center Opening: No

Material Gate: None

Water Tight: None

DB OPTIONS # 1

Cabshield: Full Width-3/4 (36″)

Asphalt Apron: 10″ Push Type

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: (1) Per Post amber

flashing

Clear Backup: No

DB OPTIONS # 2

Cap angle sides and tailgate

Steps inside and out

Front mud flaps

Front amber 6″ oval LED lights c/s

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Metal -2×8

Wires in Conduit No

Delivery Fuel/Charges: No

PAINT            Warren Black

PTO    Power Take Off System

Muncie TG8 Series

TARP SYSTEM          TARP system – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Tarp Size: 90″x20′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Electric Plug: 7 Way

For more information on our WAR series or any of our other models, please visit our Products page on our sister website, dumptrucks.com. We have dedicated sales representatives standing by to help answer any questions you may have and to help spec your next unit.

Call our office today at 800-804-5765!

Heavy Duty Demolition Dump Body

Warren Dump Body of the Week – 16.5′ WAR Body

heavy duty demolition dump body

IMG_5672 2

Heavy Duty Demolition Dump Body

This week’s featured dump body is a heavy duty demolition dump body manufactured for our great customer, Worldwide Equipment – Columbia. This unit has a special paint job with matching fenders, per the customers request.

Dump Body:

Yardage: 19/21
Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450

Side / Material: 54” 1/4 AR450

Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
IMG_5674 2

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 60
Slope: None
Chains: 5/16″
Double Acting: No
High Lift Gate: No
Water Tight: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24”)
Asphalt Apron: 8″ Push Type
Center Board Pockets: Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal w/air shift CCW

Console: Clutch Shift Air
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Side Boards: Pine – 2×8
Covers: No
Wires in Conduit No

Paint:

Color: Metallic Blue
PTO POWER TAKE OFF – PTO Muncie TG8 Series
TARP SYSTEM TARP system – installed
Brand: Donovan
Manual / Electric: Manual

Fender Match – Metallic Blue
Aluminum Tread plate installation

The WAR body is Warren’s heavy duty demolition dump body model. For more information on the options of this elliptical dump body, please visit our sister website www.dumptrucks.com. There you will find information on all of our great dump body models. Remember, we can customize any of our models to fit your specific needs.

Ready to get a quote on your next unit? Call us today at 803-776-7400!